Energy
M. Bagheri; I. Mirzaee; M. Khalilian; V. Mousapour
Abstract
The present study simulates Invelox in a three-dimensional and stable way. The flow regime is turbulent flow and an unorganized grid with 350000 cells was utilized. This work has studied the modeling of invelox with conventional dimensions and four different sizes in the form of four modes for use in ...
Read More
The present study simulates Invelox in a three-dimensional and stable way. The flow regime is turbulent flow and an unorganized grid with 350000 cells was utilized. This work has studied the modeling of invelox with conventional dimensions and four different sizes in the form of four modes for use in a residential building. The numerical data with an error of less than 6% are in good agreement with the available experimental and analytical data. The results show that considering the average velocity of mode 2 with a velocity of 6.54 m/s and a 5% difference from the other two modes, it can be operated in a residential building. It is worth noting that in this investigation, in addition, the effect of dust on the turbine performance was evaluated. The results represent that the oscillation frequency of the blades increases with the increase of the rotational speed. In the case of not considering dust particles on blades, this amount increases by 25%, while considering dust particles with an amount of 0.1%, it increases up to 300%, and this can cause irreparable damage to the turbine as well as the power generation system.
Chemical Engineering
M. Mahmoudi; I. Mirzaee; M. Khalilian
Abstract
The exploitation of nanofluids is the most noteworthy way to make better the rate of heat transfer in solar collectors. Moreover, recently utilizing thermoelectric generators are widely studied to direct the conversion of heat into electricity. The objective of the present study is to deal with a novel ...
Read More
The exploitation of nanofluids is the most noteworthy way to make better the rate of heat transfer in solar collectors. Moreover, recently utilizing thermoelectric generators are widely studied to direct the conversion of heat into electricity. The objective of the present study is to deal with a novel multigeneration system that includes a nanofluid-based parabolic trough collector integrated with a quadruple effect absorption refrigeration cycle (cooling), a thermoelectric generator (power), a PEM electrolyzer (hydrogen), vapor generator and domestic water heater. A parametric study is accomplished to consider the effect of significant parameters such as the volume concentration of nanoparticles, solar radiation, absorption system’s generator load, strong solution concentration, and TEG’s figure of merit on the overall system performance, hydrogen production rate, cooling load, COP and useful energy obtained by the collector. It is observed that the power generated by the system is 18.78 kW and the collector energy and exergy efficiency are 82.21% and 80.48%, respectively. Furthermore, the results showed that the highest exergy destruction rate occurs in the solar system at the rate of 4461 kW. The energy and exergy COPs of the absorption chiller are discovered to be 1.527 and 0.936, respectively. By increasing the concentration of nanoparticles and the amount of solar radiation, the amount of collector useful energy increases while the hydrogen production rate and the generated power in the TEG decreased. The cooling capacity and COPs of the absorption system increased with an increase in VHTG load and decreased with an increase in concentration of the strong solution.
